This content comes from@What is worth buying app, the point of view only represents the author himself | Author: Sun Xiaoning

挑战10万装修一个家:自己独立安装壁挂马桶遇到的那些坑

Creative position statement:

挑战10万装修一个家:自己独立安装壁挂马桶遇到的那些坑

Personal installation and sharing of wall -mounted toilet installation. Do not involve any interests

Share the process of stepping on the pit, I hope you will take less detours! Intersection Intersection Intersection

挑战10万装修一个家:自己独立安装壁挂马桶遇到的那些坑

Seeing the articles of the big god’s hair wall hanging toilet in the community, it was successfully planted! Intersection Intersection

挑战10万装修一个家:自己独立安装壁挂马桶遇到的那些坑

Let’s talk about the advantages and disadvantages of wall -mounted toilets

挑战10万装修一个家:自己独立安装壁挂马桶遇到的那些坑

Advantages: The wall -mounted toilet also hangs the toilet on the wall, bury the water tank into the wall, and save all space for the water tank! Due to the buried in the wall, the sound is greatly reduced, and there is almost no sound when flushing. The water tank of the wall -mounted toilet is much higher than that of ordinary toilets, and the impulse is much larger than ordinary ones. There is no dead end in cleaning because of not contacting the ground.

挑战10万装修一个家:自己独立安装壁挂马桶遇到的那些坑

Disadvantages: The installation requirements are high, and the early investment is large. The toilet and the water tank are separated. In short, it is expensive. If you can accept this shortcoming, then there is no problem, the wall -mounted toilet is almost perfect!

挑战10万装修一个家:自己独立安装壁挂马桶遇到的那些坑

Today, according to some of the pits I encountered in the actual installation process, I will bring you an article on wall -mounted toilet installation. I installed it for 3 months before and after the toilet! Intersection Intersection Intersection

挑战10万装修一个家:自己独立安装壁挂马桶遇到的那些坑

The common on the market is about the above a few brands on the wall -mounted toilet, but unlike other bathroom products, things buried in the wall are troublesome, so you must choose a professional.

Installation of water tank in the early stage

Under the popular science here, the water tank and toilet of the wall -mounted toilet can choose different water tanks. Personally, I think the water tank is undoubtedly buying Gobber, because some actual products are buried in the wall for decades, not to mention that Jiboli also promises to make full money for 10 years. The accessories; the toilet can be selected, but I still have a complete set of Jibcoli. In case of the quality of the water leakage, there will be no peel.

Step 1: Choose a wall -mounted toilet water tank

挑战10万装修一个家:自己独立安装壁挂马桶遇到的那些坑

The time for the wall -mounted toilet should be before renovation, or if you are afraid of the time from purchasing to installation for too long, you can choose the brand before entering the market (recommended to be installed The water tank express also takes some time) Wall -mounted toilet water tank involves the water tank in the wall or in the fake wall in advance, and the water tank must be connected to the water inlet pipe. After the design map, the kitchen water and electricity is changed to arrange the toilet workers to install it. In general, the first step is to set at least when the decoration starts at least when the decoration starts.

Compared with the traditional toilet, wall -mounted to the position of the toilet is free. As long as the installation conditions are determined, you can put it in your favorite position.

挑战10万装修一个家:自己独立安装壁挂马桶遇到的那些坑

Say three kinds of water tanks

SIGMA’s independent water tank, height of 113cm, 53cm width, and 19cm thick. It is suitable for normal wall embedded installation. The bottom of the independent water tank design is thick, and the expansion screw is required to be fixed with the ground.

挑战10万装修一个家:自己独立安装壁挂马桶遇到的那些坑

KAPP’s independent water tank, the size is 82cm, the width is the same as above. The reason for the height is to consider environmental factors. If you want to put it under the window, the general family bathroom window height is between 100-120cm. Putting it under the window, a part of the distance can be designed with the height of the fake wall. The height is flat or lower than the window countertop.

Pay attention to the thickness of the wall surface for embedded installation. The general wall thickness of the bathroom is between 20-24cm.

Omega high -board water tank, height 112cm, width of 50cm, this is a water tank for fake walls.

挑战10万装修一个家:自己独立安装壁挂马桶遇到的那些坑

Omega short version of water tank, mentioned above, choose according to your own situation.

挑战10万装修一个家:自己独立安装壁挂马桶遇到的那些坑

The installation service of the Gobli flagship store did not cover me where I was, but they claimed that they could provide a nanny -type installation and guidance for me to save these 600 yuan installation fees, so I self -confidently guided the hydropower master to finish the project. Don’t listen to the hydropower master what you can install this and the same. The wall -mounted toilet is still a niche product. 99 people in the house are installed with ordinary toilets. In this probability, do you feel that the hydropower master has installed it?

挑战10万装修一个家:自己独立安装壁挂马桶遇到的那些坑

Step 2: How to choose the way to install the water tank

There are two kinds of solutions here

The first is the embedded type, which is to open the front of the bathroom and bury the water tank into the wall. This is what my family does, as shown below.

挑战10万装修一个家:自己独立安装壁挂马桶遇到的那些坑

The second is to make a fake wall. Doing a fake wall does not need to smash the wall, but you need to make a fake wall. It is better to use a red brick on the original wall and then use a light steel dragon skeleton. The water tank is wrapped in the fake wall.

挑战10万装修一个家:自己独立安装壁挂马桶遇到的那些坑

In comparison, I think that the advantage of choosing embedded type is that after the later decoration, I only see a toilet on the wall. It takes up small space and looks more neat, and it will not highlight a piece.

挑战10万装修一个家:自己独立安装壁挂马桶遇到的那些坑

This fake wall or embedded is really not a random decision. This depends on whether your wall is a load -bearing wall. If you are a load -bearing wall, how do you buckle a hole in the wall? Intersection Intersection There are also high water tanks, and independent non -independent water tanks must also consult customer service before buying!

挑战10万装修一个家:自己独立安装壁挂马桶遇到的那些坑

In fact, the fake wall is not so ugly. The fake wall can be used as a niche. You can put a small basket to put some toiletries, or put some decorative ornaments to improve the taste of life and be more practical. (I plan to use the bathroom counter to extend this fake wall area, this overall feeling will be just a little bit)

And even if the area of ​​the fake wall is only a little more, the design of the wall -mounted water tank is originally small. Even if the fake wall in the house occupies the same as the traditional toilet water tank, there is no need to consider space issues.

In fact, I can’t do a wall to the end. The following pictures are the real wall -mounted toilet.

Step 4: Drainage pipe transformation

The drainage pipes that most developers comes with are U -shaped and S -shaped. In order to avoid blocking the wall -mounted toilet, the U -shaped pipe below the toilet is replaced with the U -shaped. (Because there are no lives downstairs, I directly found the original sewage pipe downstairs and changed the original sewage pipe)

The other toilet did not follow the original ground sewage outlet, but was discharged through risers. I have to say that Gobber’s majors, no matter what brand of wall -mounted toilets buy, have to use the product of Gobberry Sanlong, which is different from the ordinary three -link. Unobstructed, as long as the supervisor is PVC110, it can be used.

My family bought a total of two toilet water tanks, one self -reliance and one ordinary model, and used the toilet displacement. People from the Gobli flagship store said that the material of the Gobber displays was imported, and the inner wall was smoother, and the flushing was not easy to block, but I didn’t buy it at the time. In order to catch up, I bought it locally.

挑战10万装修一个家:自己独立安装壁挂马桶遇到的那些坑

Step 4: Install water tank & building walls

挑战10万装修一个家:自己独立安装壁挂马桶遇到的那些坑

After the preparations are completed in the early stage, the water tank is officially installed and connected to the water pipe. To determine the installation position of the toilet, leave the power of the smart toilet lid, and the water (for the first time I successfully forgot the water of the smart toilet lid, and the second rework)

I directly penetrated the wall of the bedroom and the toilet, and the thickness was just right to bury the water tank.

The specific step is to first place the water tank frame at the planned position. Fix the bottom feet with thick screws and bottom surface. First, a fixed position of the eyes in the base is fixed. After installing the expansion screw, use the nut to fix. (Here is the height after the bricks finish the brick, about 8 cm. This should be specifically combined with the tile master, and the tile process is different.)

挑战10万装修一个家:自己独立安装壁挂马桶遇到的那些坑

After the fixation, the water tank is connected to the angle valve of the indoor water supply pipe.

Embedy water tank sealing wall: I also hesitated to choose the embedded water tank, because most of the recommended on the Internet is to do fake walls, because my bathroom space is OK. The buried one is done, and the effect looks good. (There is a pit here, that is, the hydropower master does not understand the link method, and directly takes over the control parts to pick me up ……….

As a result, I hit the wall for the second time, and the death was changed.

挑战10万装修一个家:自己独立安装壁挂马桶遇到的那些坑

The picture below is a deadly connection

挑战10万装修一个家:自己独立安装壁挂马桶遇到的那些坑

The first one is because there is no fake wall. The step is to fill the gap with a red brick first. After filling, pull the iron wire around the water tank after filling it, in order to build cement on it for a while. After the cement is built In the wall, in addition to the drainage pipe and toilet bracket of the water inlet pipe, of course, there are also toilet keys. The cement is flattened in front of the original. This kind of cheap is also laborious.

Fake wall buried water tanks: The thickness is generally about 30-50mm, and it cannot exceed 60mm at most. The width is between 70-100mm. The height is more free. The water tank can choose a higher flushing effect. It will feel more clean. The material is the same as the pipeline. The light steel keel is built, and the surface is sealing the wall with a moisture -proof gypsum board. The surface of the gypsum plate is waterproof. After that, it is necessary to post tiles normally.

PS: After the wall of the wall is completed, do the drainage normally.

挑战10万装修一个家:自己独立安装壁挂马桶遇到的那些坑

The above two screw holes must be taken care of. I just forgot to tell the master that the master only left me four screw holes, but the bricks were blocked by bricks! Intersection Intersection Intersection Intersection I pulled it out for 4 days! Intersection Intersection Intersection This is a very big pit

Second, toilet installation

This step can be done after the toilet tiles are pasted. It depends on personal needs. Generally, it is more pressed after the ceiling is done. When you install the later construction, you should be distressed when you get it. The installation in the later period is relatively simple. (I was installed after all the decoration at home was completed))

挑战10万装修一个家:自己独立安装壁挂马桶遇到的那些坑

Step 1: Drive inspection. You must check the goods when receiving the goods, otherwise the ceramic piece will be paid by yourself.

挑战10万装修一个家:自己独立安装壁挂马桶遇到的那些坑

Contact customer service for installation. When disassembling packaging, pay attention to whether the items are damaged. For example, obvious trauma, bumps, scratches, etc., the accessories are in contrast to the accessories table to see if there is no lack of.

Step 2: Change the water pipe & drain pipe

挑战10万装修一个家:自己独立安装壁挂马桶遇到的那些坑

Connect the water flush pipe (below), first push the sealing ring to the innermost of the tube, and it can’t be pushed.

挑战10万装修一个家:自己独立安装壁挂马桶遇到的那些坑

Insert a sealed tape into the flushing outlet (as shown below).

挑战10万装修一个家:自己独立安装壁挂马桶遇到的那些坑

After stuffing it, the tube will be leaked. Use a marker to draw the mark on the two sides of the outermost layer of the toilet.

The same is the same as the drainage pipe below.

After the two places are marked, the two pipes are stuffed into the wall and then do the same thing to make the mark.

There are two markup points on a drainage pipe of a water inlet, and write down these two points with a tape measure.

挑战10万装修一个家:自己独立安装壁挂马桶遇到的那些坑

Start with the sealing plug, find the distance just measured above with a tape measure, saw the remaining tube, pay attention to keep a reserved distance of 5mm. The steps of the two pipes are the same to cooperate with the pipelines on the wall.

Step 3: Install the pipeline & thread pole

The sliced ​​side will be rough. The master needs to use a knife to put it in the pipes reserved in the wall. After installing it, use soapy water to apply the two places to seal the upper and lower parts. Base.

The thread rod is twisted on the two protruding rods, and the distance from the wall is 110mm.

挑战10万装修一个家:自己独立安装壁挂马桶遇到的那些坑

In the two holes of the toilet, a fixed device is also installed, which is under the role and principle.

Step 4: Install toilet

挑战10万装修一个家:自己独立安装壁挂马桶遇到的那些坑

There are four holes behind the toilet, which corresponds to water flushing and drainage up and down. The role corresponds to the two thread rods. The toilet is pushed into the wall hard and pushed it into the wall.

After encountering the wall, don’t let go of your strength, immediately cooperate with the connected device with the previously reserved thread rod, stretch the wrench from the two holes on the back side of the toilet surface, and twist the toilet and threaded pole tightly together. The movements on the left and right sides are the same.

The toilet seat is fixed for a circle with glass glue. Install the lid: Insert the tone of the tape with the coating strip of the built -in hole into the two small holes that just wins the wrench, then put the screws and fix it with a screwdriver. There are two small pointed on it.

挑战10万装修一个家:自己独立安装壁挂马桶遇到的那些坑

Put the hinges at both ends of the toilet lid and put it in the two extended small pointed tips, and install it after hearing a click.

挑战10万装修一个家:自己独立安装壁挂马桶遇到的那些坑

After setting up, test it as soon as possible that the product is of good quality and strong water flushing. (How to strictly test the experiments in the glazed, flushing ability, etc.!)

挑战10万装修一个家:自己独立安装壁挂马桶遇到的那些坑

This is the effect of the finished product of the water tank. It is relatively clean and cleaned. The following is easy to clean, so that the bathroom looks less “bloated”.

The effect of the fake wall finished product, because the existence of the fake wall will protrude a distance of 3-6 cm, you can put some things on the table. This is relatively good for installation, and there are more people who choose. The situation can be designed with many distinctive decoration styles. Because this bathroom belongs to a long strip, the width is limited. The water tank of ordinary toilets plus the toilet is large, so the cool side is only 50cm, which is especially suitable for the relatively small and narrow situation of the bathroom. So I did not hesitate to choose Cool Fang at the time, and seeing that the effect of pretending to be so good is indeed buying right!

The above is the entire content of the wall -mounted toilet installation. As a user of a wall -mounted toilet, the finished product is exquisite and beautiful, which is very suitable for modern aesthetics. If this article helps you, don’t forget to like+collection!